SILICONE Free (LIQUID) DEFOAMER
Product Name Composition Solid Content, % Application
TRIOBAN CN 0148 A Combination of fatty alcohols and esters 100% It is an organic defoamer especially formulated for the production cement / asbestos roofing sheets.
TRIOBAN PC NXZ A Blend of mineral oil with fatty acid esters 100% Minimize foaming commonly encountered in the production and application of mortars, adhesives and plasters. Very effective in removing entrapped air in building products when the air content must be minimized. This is especially important for cement or anhydrite gypsum-based self-leveling compounds, which require a smooth surface appearance.
TRIOBAN PC NDW A Blend of mineral oil with fatty acid esters and hydrophobic particles 90-95% Minimize foaming commonly encountered in the production and application of mortars, adhesives and plasters. Very effective in removing entrapped air in building products when the air content must be minimized. This is especially important for cement or anhydrite gypsum-based self-leveling compounds, which require a smooth surface appearance.
TRIOBAN NSDL A Blend of mineral oil with fatty acid esters 98-100 % A defoamer for all common emulsion systems. It provides the following properties controls foaming and aeration during manufacture, filling and application & it is effective over wide range of pH.- for Construction chemical industries.
SILICONE BASED (LIQUID) DEFOAMER
Product Name Composition Solid Content, % Application
TRIOBAN SD 30 PDMS Compound emulsion 30% Improve the homogeneity of the finished products by reducing significantly foam air entrapment.
TRIOBAN SG 20  PDMS Compound emulsion 20% Improve the homogeneity of the finished products by reducing significantly foam air entrapment.
TRIOBAN SD 10 PDMS Compound emulsion 10% Improve the homogeneity of the finished products by reducing significantly foam air entrapment.
TRIOBAN DF 21 PDMS Compound emulsion - Improve the homogeneity of the finished products by reducing significantly foam air entrapment.
SILICONE BASED (POWDER) DEFOAMER
Product Name Composition Active Content, % Application
TRIOBAN PWD RD 2 Silicone powder defoamer 25% Effective release of the active ingredient takes place even at low temperatures, and a good antifoam effect is also achieved at elevated temperatures most commonly used in Construction
TRIOBAN PWD SD 15  Silicone powder defoamer 15% Construction and oil gas exploration, agrochemicals powders, cement paints , powder paints, mortars, adhesives, gypsum etc.
TRIOBAN PWD STN  Silicone powder defoamer 15% Improve the homogeneity of the finished products by reducing significantly foam air entrapment.
SILICONE Free (POWDER) DEFOAMER
Product Name Composition Active Content, % Application
TRIOBAN PWD 26 silicone Free defoamer in powder form 65% Construction and oil gas exploration, agrochemicals powders, cement paints , powder paints, mortars, adhesives, gypsum etc.
PRESERVATIVES (DRY FILM)
Product Name Composition Solid Content, % Application
TRIOCIDE DCT  A combination of benzimidazole carbamate , Diuron and 2-n-0ctyl -4-isothiazolin-3-one (OIT) 11.5-12.5% Carbendazim, 19.5-20.5% Diuron, 2.9-3.1% OIT All types of paints and coatings, exterior coatings.
TRIOCIDE DCO A glycol based combination benzimidazole carbamate and 2-n-0ctyl -4-isothiazolin-3-one (OIT) 10% Carbendazim, 3% OIT Plasters and other building material from dry film fungal and algal growth and for protection of timber / wood from bluestainand surface mould.
TRIOCIDE DDZ Stabilized water based formulation of Zinc Pyrithione (Zinc 2-pyridinethiol-1-oxide) and Diuron Min. 20% Zinc Pyrithione, Min. 20% Diuron All types of coatings, exterior coatings.
TRIOCIDE DZB Stabilized water based formulation of Zinc Pyrithione (Zinc 2-pyridinethiol-1-oxide) and 1,2 - benzisothiazolin -3-one (BIT) Min 6.0% Zinc Pyrithione, Min. 5.5% BIT All type of interior paints and coating, antibacterial paint and hygiene
TRIOCIDE DF 15 Glycol based solution of 2-octyl -2H-Isothiazolin -3-one 15.0-15.5% OIT Complete prevention of fungal growth on coatings and other products and for the protection of timber from the surface fungi.
TRIOCIDE DZ 40  A stabilized water based formulation of Zinc Pyrithione (Zinc 2-Pyreidinethioll-1-oxide) Min 40.0% Zinc Pyrithione Complete protection of all types of paints , coatings and exterior coatings from fungal and algal growth.
PRESERVATIVES (IN-CAN)
Product Name Composition Solid Content, % Application
TRIOCIDE IM 15 A Blend of 5- chloro-2-methyl-4-isothiazolin-3-one (CIT) and 2-methyl -4-isothiazolin-3-one (MIT) 0.35-0.45% (MIT) 1.05 - 1.15% (CIT) Total protections from microbes. Suitable for formaldehyde sensitive formulations.
TRIOCIDE IMF A Blend of 5- chloro-2-methyl-4-isothiazolin-3-one (CIT) and 2-methyl -4-isothiazolin-3-one (MIT) and formaldehyde 1.0-1.1% (CIT/MIT)
3.0-3.5% formaldehyde
Total protections from microbes.
TRIOCIDE IBM  Water based Formulation of of 2-methyl -4-isothiazolin-3-one (MIT ) 1,2 - benzisothiazolin -3-one (BIT) ≥ 2.5 % each of (BIT and MIT) Synergistic preservative for water based formaldehyde sensitive products. Biodegradable and eco-friendly.
TRIOCIDE IB20 Glycol based formulation of 1,2 - benzisothiazolin -3-one (BIT) 19.5- 20.5% (BIT) Glycol based low toxicity biocide
TRIOCIDE IB20 P Water based formulation of 1,2 - benzisothiazolin -3-one (BIT) 19.5- 20.5% (BIT) Water based low toxicity biocide.
TRIOCIDE IBR Formulation of of 5- chloro-2-methyl-4-isothiazolin-3-one (CIT) and 2-methyl -4-isothiazolin-3-one (MIT ) and bromonitropropane diol (Bronopol) 1.0-1.1 % (CIT/MIT) Biocide for industrial aqueous based products
TRIOCIDE ISOTHIO 14  A Blend of 5- chloro-2-methyl-4-isothiazolin-3-one (CIT) and 2-methyl -4-isothiazolin-3-one (MIT) 14% min (CMIT and MIT) Biocide for industrial aqueous based products

Trio Chemicals & Allied Products © 2018 All Rights Reserved.

Design with By  xirainfotech